Видео

mine will turn on for a second and turn off, do you know why?

The odds on 2 ic chips going bad is very rare. Everyone should first check the four mosfets that are all together before replacing anything. Look for a short or a semi short period

sorry I explained me wrong. I meant that I reached out to the ace magician support and they could help me they said they do not do repairs. That’s why I asked is there any possible way to send it to you?

Tengo un problema he puesto a cargar el arrancador noco3000ah,en una grúa que es de 24v y el arrancador es de 12v y ahora no arranca los vehículos pero supuestamente está cargado completo y enciende la linterna que le abra pasado

Hello i reached out to the Support from ace magician and they couldn’t help me repair it is there ans possible way to get in touch with you. I would okay to get mine fixed

Power speakers know good outside events over heat 🔥 you can fix problems amplifiers plate over heat 🔥 buy drilling air vent circulation hole in your box are buy upgrades Power plate amplifier wit cooling fans still knees modified boxe air vent circulation that's what i done never blowing speakers again

My Wave Radio CD player from 2008 was skipping. Radio still worked. Didn’t fix it. I bought a renewed Bose Wave System lV from Bose in 2021 for $299. The person I gave the old one to said it just died

This problem 🔥 🔥 heat built up amplifier are boxes have know electric cooling fans ? This amplifier blow out amplifier plate needs cooling fan ? Do have model with cooling fan system my ELX 12P blow up amplifier went out don't matter if I replacement new amplifier plate couple months go buy going blow again know air vent

Mine is doing the exact same thing. Going to try this, but what led you yo those resistors?

Hi, how can I get a replacement for the backlight reflective sheet (the one with the holes)?

Thank you for this !

Hola yo tengo ese mismo problema con 10 parpadeos,ya revise las tarjetas y todo bien ,lo que note es que no tengo los 15v que otorga la fuente ,espero me puedas ayudar

I have the same Speaker. It turns on, all the buttons work when BT connected to my phone and even control their respective function (next song, volume up/down led lights turn on etc). No signs of water getting in anywhere. BUT no sound comes out of the unit at all, not even when powering on when it normally says “bazooka audio on”. Any ideas what is going on?

I have the same problem since I tried to fast charge the device. By the way it was on when I pluged in the charger. Do you Think that was my mistake?

I have the exam same tv and issue UN65MU6500FXZA version FA01 that is in the video here. Do you know what the part number for the backlight strips is?

Love seeing you teach the young man. Teach children to be capable !

hello, we spilled some water on the controller? Can I just put it in rice?

Great video, well done. 👏

Hello my sony bravia kd-49 having issue. It comes on when I switch it on and displays for a few seconds and goes blank. The backlight will still be on and there will be sound but no image displays. Please someone should help

Where can I buy the capacitors?

You not only saved that console but in a year of fixing customers consoles I changed a series x hdmi and after it was beep on beep off I replaced the console at my cost , watched your video today went back to the box of shame took it out and checked the extract same place guess what ??? Yep it was loose pinged off the board so I replaced from a donor and is now fully working again Thank you so much for this one amazing that the 2 consoles had the same issue

Great catch. Microscopic resistor very easy to miss when it is missing. 👍

Thank u so much this have help me I have 2 years of this problem now it has been solved

It worked but it’s blurry. Any solution for that ?

This is the most well Informing best detailed and examined video on all of RUclips!! Thank you Sir your a God Send

the very reason the bcm fried in the first place,jump starting DONT do this on an SL

Touchmix 30 24 channels out put noice problem ic 4580 volte +7-7 good or bad

Wow! Great video. I have the exact same issue that just happened to me, it’s too bad you’re all the way in Florida.

Good job, Youness. Make it look easy when you know what you’re doing.

He'll yeah bro u saved me from buying a new tv thank u so much for video

Thanks, it works, i dont need to buy boost ic anymore, save time and money.

The problem was a bad backlight ic on the lcd screen.

Great fix, Youness 👍

Can i try this in CF 31 model it will work or not

I have ea8500 just logo led constant on what should I do?

I had the same issue I did your trick and it work but why does it fix it

you are a good person. i am very happy to find this video. thank you so much for this video. ❤ very very appreciative

After watching a lot of your videos, it's easy to see you are very experienced and are quite skilled. What would you recommend to a beginner how to learn the trade and become a real technician?

Good day i have same problem samsung UA58TU7000K same problem can i do same and where should i put tape please

Perfect fix thanks 😊

Followed this and got my screen off, but tried everything to get those bottom screws out but they will not turn. Any other ideas on how to remove them?

Thanks‼Mate‼, I just watched the video he made and repaired my own headphones, it's really difficult without a camera 📹, but I managed, thanks again.‼

Hi bro i have a problem in dual shock 4 my ps button is auto pressing for long how to solve it pls help to solve this problem

Help. Advice. Please. My 2012 Mitsubishi WD-65638 powers on with a loud screeching sound. Sometimes the sound dies down, but it often returns while the TV is playing. The screeching sound lasts for many minutes. I have to say approximately five could be a few moments longer. I have replacement lamps in the closet and could replace the lamp. However, in the 12 years I've owned this TV, a lamp replacement has never been preceded by such a screeching sound. Could the issue be something else, like the color wheel or the fan? Should I buy a can of compressed air and blow it out? It's difficult to find a repair person for this TV. I've called three different local companies with no luck.

Thank you Sir

So the t-con board keeps disconnected permanently? Not necessary anymore???

You have to be very carefull when working on high voltage devices, you almost get burned off , when touching the Board , at 06.46 or so.

I had a bass amp head go out like this due to a power surge in a home. I was lucky that only a few resistors got knocked out in the power rails. If the woofer and tweeter amps would have got damaged, the repair could ahve been a lot more expensive. Thanks for sharing

The best!!! Crack...